|
When fitting 2 signs back to back you will require 4 off back to back clips.
You must mount one sign to the post in the normal way using 2 off 76mm stainless steel clips, nuts, bolts, washers. Ensure that these are fastened tightly to the post as you will not be able to gain access to tighten these once you have fitted the second sign on the reverse.
now that the first sign is in the correct position and securely fastened to the post you can then slide 4 off back to back clips into the channels of the existing sign on the post. These are best fitted close to the edge of the channel in order to make it easy to tighten the clips.
You can now slide the second sign onto the 4 back to back clips. Adjust into position and tighten the clips securely.
|
